Multi-Meter Test Lead Kit

LOADpro performs voltage drop test with the push of a button. On a 12 Volt system, pressing the switch applies a load of approximately .5 Amps across the circuit. This simple test finds problems in corroded wires/connections and shorts to ground. By loading the circuit, LOADpro makes a voltage drop test "on the fly". Use LOADpro with your DMM and follow our test method - you will find wiring faults quicker. LOADpro are OEM approved finds corroded circuits fast! LOADpro finds these problems fast - High Corrosive Resistance, Shorts to ground and Open Circuits. LOADpro Test Leads feature SteadyPin Probe Tips, which allows the probe to sit firmly on a male ECM or connector pin. Use LOADpro and you'll spend less time diagnosing wiring problems. Start doing voltage drops now! Diagnose faster and earn more $$$. Works with your existing DMM.