Plombco StickPro 408Fe-28 Steel 1/2 oz Stick-On Adhesive Tape Wheel Weight

Plombco StickPro 408Fe-28 Steel 1/2 oz Stick-On Adhesive Tape Wheel Weight

When balancing a wheel, the technician must use the correct tape weight in order to properly fit the rim. All of the tape weights we offer come with extremely strong tape�that�sticks to the rim better,�which�results in a better balanced wheel.

For Everyday Application

• Low profile 1/2 oz segments
• Width 3/4"
• Length 6"
• High corrosion resistance
• Tapered segment design for a better contour
• Sold as 28 strips ($1.18 per strip)
• 8 Segments per Strip

Instructions:

1. Clean:�Clean the area where the wheel weight is to be applied using buffing solution. To do so, spray the area thoroughly and then wipe with a clean soft cloth.�
2. Contour:�If the wheel weight is not pre-contoured follow the instructions below; otherwise, skip to step 3. Before removing the liner, apply the weight against the wheel and using your fingers gently contour the shape to the radius of the wheel.
3. Remove the liner:�Remove the liner and avoid touching the exposed adhesive.�
4. Apply:�Using your fingers, apply a uniform pressure throughout the surface (do not use a hammer).

WARNING: Cancer and Reproductive Harm -�www.P65Warnings.ca.gov.