Wheel Tite 19.5mm Sleeve Flange Nut, M22 for Hub Piloted Wheels

The ESCO Wheel Tite Sleeve Nut is a high quality flange nut that centers truck wheels for stud piloted wheels. ESCO Wheel Tite Nuts properly align the wheel, allowing it to run concentric to the hub which prevents wasted fuel caused by rolling resistance or drag. Standard flange nuts only clamp against the disc surface which does not eliminate extra space between stud and stud holes. This space allows room for the stud to oscillate as the wheel revolves. This is the leading cause of torque loss, vibrations, clocking and wheel offs. Each ESCO Wheel Tite Sleeve Nut clamps against the disc surface, self-centers and eliminates extra space in between the stud and stud holes. This design eliminates wheel clocking or unwanted wheel movement on the studs. ESCO Wheel Tite Sleeve Nuts are available in 4 different lengths for various wheel configurations. Works great on aluminum steers, steel drives and steel outer/aluminum inner drive combinations 22 mm thread Sleeve length 19 mm Stops wheel clocking and reduces the risk of wheel off's Lowers vehicle maintenance costs as ride improves and wear factors are reduced Improved suspension life as a result of reduced wheel vibration